cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
643
Views
0
Helpful
2
Replies

ACS SE won't boot.

peterhkim
Level 1
Level 1

I have a brand new ACS SE 1100. As soon as I pulg in the power, I see fast blinking blue light. Any idea anyone? I read this can be a power supply problem. Just want to make sure see if there is anyone who had same kind of experience.

thanks.

2 Replies 2

rochopra
Cisco Employee
Cisco Employee

ACS only comes in the following hardware versions:

1111

1112

1113

Will recommend you to go through following link to connect it for the first time:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacsapp/csapp41/igse41/instalap.htm#wp1108322

Try connecting console to appliance and see what you are getting on console.

Hope this helps.

Thanks & Regards

Rohit Chopra

TAC Engineer-AAA

Cisco Systems

Email: rochopra@cisco.com

Phone: 212-329-2092 Extn:2156

Timing: Mon-Fri : 10:00AM - 6:00PM (MST)

mbroberson1
Level 3
Level 3

Looks like you might hanve a hard drive issues on the ACS. WE experienced this and had to RMA and have Cisco send us a new ACS SE.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: