ACS SE won't boot.

peterhkim · ‎07-26-2007

I have a brand new ACS SE 1100. As soon as I pulg in the power, I see fast blinking blue light. Any idea anyone? I read this can be a power supply problem. Just want to make sure see if there is anyone who had same kind of experience.

thanks.

rochopra · ‎07-26-2007

ACS only comes in the following hardware versions:

1111

1112

1113

Will recommend you to go through following link to connect it for the first time:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacsapp/csapp41/igse41/instalap.htm#wp1108322

Try connecting console to appliance and see what you are getting on console.

Hope this helps.

Thanks & Regards

Rohit Chopra

TAC Engineer-AAA

Cisco Systems

Email: rochopra@cisco.com

Phone: 212-329-2092 Extn:2156

Timing: Mon-Fri : 10:00AM - 6:00PM (MST)

mbroberson1 · ‎07-31-2007

Looks like you might hanve a hard drive issues on the ACS. WE experienced this and had to RMA and have Cisco send us a new ACS SE.