enabling multicast routing 3750

Unanswered Question
Jul 27th, 2007

hi all

i am trying to enable multicasat routing on a 3750 switch

one port is configured as a routing interface with ip address

according to cisco site it should just be a case of entering 'ip multicast-routing distributed' followed by ip pim config.

unfortunately the 'ip multicast-routing' command is not available.

my switch is running ipbase-mz.122-25.SEE2

can anyone please help?

thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
jwdoherty Fri, 07/27/2007 - 08:21

Believe you might need the IP Service image to obtain multicast routing support.

Edison Ortiz Fri, 07/27/2007 - 08:23

You need this image for multicast routing, c3750-ipservicesk9-mz.122-25.SEE2

Actions

This Discussion