Jon Marshall Sat, 07/28/2007 - 01:16
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


Could you post output of "sh ver" and also post the configuration commands you are using to configure pim.



Jon

vipinyadav84 Sat, 07/28/2007 - 01:21
User Badges:

Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Fri 28-Jul-06 07:19 by yenanh

Image text-base: 0x00003000, data-base: 0x00EB0F14


ROM: Bootstrap program is C3560 boot loader

BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWARE (fc4)


GoldstoneTechnologies uptime is 2 weeks, 1 day, 3 hours, 8 minutes

System returned to ROM by power-on

System image file is "flash:c3560-ipbase-mz.122-25.SEE2/c3560-ipbase-mz.122-25.SEE2.bin"


cisco WS-C3560-24TS (PowerPC405) processor (revision D0) with 118784K/12280K bytes of memory.

Processor board ID CAT1108ZJ1N

Last reset from power-on

1 Virtual Ethernet interface

24 FastEthernet interfaces

2 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.


512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00:1A:E3:EF:41:00

Motherboard assembly number : 73-9897-06

Power supply part number : 341-0097-02

Motherboard serial number : CAT110850YV

Power supply serial number : AZS110410N6

Model revision number : D0

Motherboard revision number : A0

Model number : WS-C3560-24TS-S

System serial number : CAT1108ZJ1N

Top Assembly Part Number : 800-26160-02

Top Assembly Revision Number : C0

Version ID : V02

CLEI Code Number : COMMG00ARB

Hardware Board Revision Number : 0x01



Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 26 WS-C3560-24TS 12.2(25)SEE2 C3560-IPBASE-M



Configuration register is 0xF





interface vlan 1

ip address 192.168.3.10 255.255.255.0

ip pim dense-mode



Jon Marshall Sat, 07/28/2007 - 04:01
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


You have the IP Base image which does not support multicast routing.


You need the IP Services image to do this.


HTH


Jon

ankbhasi Sat, 07/28/2007 - 06:21
User Badges:
  • Cisco Employee,

Hi Vipim,


As Jon stated you need ip services image.


So download image "c3560-ipservices-mz.122-25.SEE2.bin "


Also you can use Feature Navigator for finding features in particular images and platforms


http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp


Regards,


Ankur


*Pls rate all helpfull post

Actions

This Discussion