cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
361
Views
0
Helpful
1
Replies

1300 Root Bridge to Non-root bridge not working

Fraser Reid
Level 1
Level 1

Hi

Just trying to get a P2P WLAN bridge working and on the non-root I get the error %dot11-4-cant-assoc

and I do not know why.

What do I really need configured (SSID? MAC Address etc) for a bridge to non-root bridge constallation to work ?

Just now there is no security on the "link" to try to get this working

Would be pleased with any answer.....

Thanks

1 Reply 1

andrew.brazier
Level 4
Level 4

Assuming no security (for testing ONLY!), configure one bridge as a root bridge, define an SSID and enable the radio. Configure the other as non-root, define the SSID and flag it as the infrastructure SSID (see near the bottom of the SSIDs web page), enable the radio and it should associate assuming I haven't forgotten anything : )

Once the link is up you can layer on security, nail the frequency, etc.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: