Need second dial tone after dialing 9

Unanswered Question
Jul 30th, 2007
User Badges:

Hello, I am trying to configure CCM so when user picks up his phone and dials 9 he is provided with a second dial tone. Usually this is a feature provided by the local PBX but I wanted to know if I can do this on the CCM.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Mon, 07/30/2007 - 11:08
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Farid,

Check your 9@ Route Patterns for this setting;

Provide Outside Dial Tone

Check this check box to provide outside dial tone. To route the call in the network, leave the check box unchecked.

From this CCM 4.1.3 doc;

Hope this helps!



This Discussion