cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
427
Views
0
Helpful
1
Replies

snmp issue

bma
Level 1
Level 1

Hi

PIX 6.3, setup snmp to get traffic from pix internal interface, but not traffic show up, following is configuration:

PIx internal intface ip: 192.168.250.1

SNMP server ip is 192.168.3.54 (in the dmz network)

static (inside,dmz) 192.168.250.0 192.168.250.0 netmask 255.255.255.255 0 0

access-list dmz_access_list permit udp host 192.168.3.54 host 192.168.250.1 eq snmp

access-list inside_access_list permit udp

host 192.168.250.1 host 192.168.3.54 eq snmp

access-group.....

No error in the log, access-list dmz_access_list got hit count, but on the snmp server, nothing shows up.

Please help.

Thanks

ben

1 Reply 1

bma
Level 1
Level 1

Hi

PIX 6.3, setup snmp to get traffic from pix internal interface, but not traffic show up, following is configuration:

PIx internal intface ip: 192.168.250.1

SNMP server ip is 192.168.3.54 (in the dmz network)

static (inside,dmz) 192.168.250.0 192.168.250.0 netmask 255.255.255.255 0 0

access-list dmz_access_list permit udp host 192.168.3.54 host 192.168.250.1 eq snmp

access-list inside_access_list permit udp

host 192.168.250.1 host 192.168.3.54 eq snmp

access-group.....

snmp-server host dmz 192.168.3.54

snmp-server community xxxxx

snmp-server enable traps snmp

No error in the log, access-list dmz_access_list got hit count, but on the snmp server, nothing shows up.

Please help.

Thanks

Review Cisco Networking products for a $25 gift card