vg224's analog no dial tone,only buzzer

Unanswered Question
Jul 31st, 2007

i am installing vg224 and ccm 5.1,now find something trouble with vg224 that is a few of analog telephone no dial tone only buzzer,i already set the voltage of the vg224 port to "high"(the default is "high" ),follow the runing-config:

!

stcapp ccm-group 1

stcapp

!

voice-port 2/0

cptone CN

station-id number 9600

caller-id enable

!

!

dial-peer voice 500 pots

service stcapp

port 2/0

!

!

please give me some advice ,thanks a lot!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
3dtgnt_ljm Wed, 08/01/2007 - 17:58

i have searched all of the document,but can not find the true yet,it is only my problem?

mcnerney@uwyo.edu Thu, 08/02/2007 - 14:06

I haven't used a VG224. I have a VG248. On the VG248 you have to enable the individual ports. You might want to telnet into the VG224 and check to see if the ports are enabled.

Larry

3dtgnt_ljm Fri, 08/03/2007 - 06:24

thanks for your message,but the circs random appear, not always one port

Actions

This Discussion