07-31-2007 02:37 AM - edited 03-14-2019 10:51 PM
i am installing vg224 and ccm 5.1,now find something trouble with vg224 that is a few of analog telephone no dial tone only buzzer,i already set the voltage of the vg224 port to "high"(the default is "high" ),follow the runing-config:
!
stcapp ccm-group 1
stcapp
!
voice-port 2/0
cptone CN
station-id number 9600
caller-id enable
!
!
dial-peer voice 500 pots
service stcapp
port 2/0
!
!
please give me some advice ,thanks a lot!
08-01-2007 05:58 PM
i have searched all of the document,but can not find the true yet,it is only my problem?
08-02-2007 07:59 AM
Hi,
Try with this IOS vg224-i6s-mz.124-2.T5.bin
Which one are you using?
BR,
Stoyan
08-02-2007 02:06 PM
I haven't used a VG224. I have a VG248. On the VG248 you have to enable the individual ports. You might want to telnet into the VG224 and check to see if the ports are enabled.
Larry
08-03-2007 06:24 AM
thanks for your message,but the circs random appear, not always one port
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide