hello

i tested it but still nothing

Mpoumpoulinas42#ping

Protocol [ip]:

Target IP address: 192.168.12.25

Repeat count [5]:

Datagram size [100]:

Timeout in seconds [2]:

Extended commands [n]: y

Source address or interface: 100.100.100.1

Type of service [0]:

Set DF bit in IP header? [no]:

Validate reply data? [no]:

Data pattern [0xABCD]:

Loose, Strict, Record, Timestamp, Verbose[none]:

Sweep range of sizes [n]:

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 192.168.12.25, timeout is 2 seconds:

.....

Success rate is 0 percent (0/

i was thinking it would be easy to connect two 3550 with routing but i can understand why its so complecate.

hello,

as per ur config,ip address 192.168.12.25 belongs to wht? host connected fa0/3 of Mpoumpoulinas42? or anything else??

if host then whts configured dg?

first try normal ping whether it is pinging.

let us know the results.

rgrds,

yes , host 192.168.12.25 belongs into a switch connected at fa0/3 ....normal ping respond 5/5.

It should be but it is nt :) this maching connected to the internet via another adsl router ...thanks