How to configure a special Incondicinal Forward

Answered Question
Jul 31st, 2007
User Badges:

I want to configure an incondicional forward from a phone to other that it can't be possible to disable by user with the corresponding softkey.

Is it possible?. How?.

I use CCM 4.1.

Thanks.

Correct Answer by Rob Huffman about 9 years 12 months ago

Hi Carlos,


I thought that this was an interesting question :) Here is how I just set this up.


1. Configure a New Softkey Template (I called mine NoCfwdAccess)


2. On this new Template move the Forward All (CFWD) over to Unselected Softkeys/Update


3.Apply this new Softkey Template to the Phone in question. Now it has no CFWDALL Softkey


4. From the Directory Number Configuration Page for this Phone, Apply the Extension you want this phone to Call Forward All to and Update/Reset


5. This phone now shows Forwarded to xxxx with no ability to change this.


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Tue, 07/31/2007 - 06:08
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Carlos,


I thought that this was an interesting question :) Here is how I just set this up.


1. Configure a New Softkey Template (I called mine NoCfwdAccess)


2. On this new Template move the Forward All (CFWD) over to Unselected Softkeys/Update


3.Apply this new Softkey Template to the Phone in question. Now it has no CFWDALL Softkey


4. From the Directory Number Configuration Page for this Phone, Apply the Extension you want this phone to Call Forward All to and Update/Reset


5. This phone now shows Forwarded to xxxx with no ability to change this.


Hope this helps!

Rob

Actions

This Discussion