Routing truble on PIX

Unanswered Question
Jul 31st, 2007
User Badges:


Routing truble on PIX ??

inside PC- can't connected to remote sites PC- etc..

the pix are default gateway on PC.

It's some way to do this ?

I have one PIX525 Version 7.2(2)

two VPN3005 Version 4.7.2.L

one WS-C4006 Version 12.1(20)EW

I have a main site connected to internett with a WS-C4006 router

passing traffic to PIX and VPN3005 with there global IP addresse.

The remote site's are connected to VPN3005-1

14 remote site IP etc... (routers C1800..)

--- Confiuration: -------------------------


outside = Global-IP.254

inside =

route outside Global-IP.1 1

route inside 1 (?? Not working)

VPN3005-1 (this is use for remote site office)

Public = Global-IP.251

Private =

VPN3005-2 (this is use for vpn Client only)

Public = Global-IP-252

Private =


Thanks for your help


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
purohit_810 Tue, 07/31/2007 - 17:22
User Badges:
  • Silver, 250 points or more

Your Routing looks like a good if your scenario as below:

Internal Network -->E0 Router E1 --> {Inside}PIX {Outside}---> ISP ROUTER

Can You show mw whole configuration:

You should look on NAT.


Dharmesh Purohit

TOR PRETORIUS Wed, 08/01/2007 - 03:16
User Badges:

The are none router inside


I Internal Network I --> {Inside} PIX {Outside} --> ISP Router

I Internal Network I --> (Private)VPN3005-1 (Public) --> ISP Router

I Internal Network I --> (Private)VPN3005-2 (Public) --> ISP Router





This Discussion