07-31-2007 06:57 AM - edited 07-03-2021 02:25 PM
dear
i wanna to configer internal dhcp in WISM
how can i
i need the pool start from 10.30.101.50 t0 200 /24 (255.255.255.0)
the network 10.30.101.0
netmask 255.255.255.0
the defoult router must be the WISM-A ip address
10.30.101.2
also i configured the DNS
and put in the ap-manager interface the primary DHCP server the ip 10.30.101.2
and i changet to 10.30.101.1
and its not work whats the mistake and what i shoul do ?i tried to use external dhcp server for ap 1020 and configure dns , optoin 43 but the ap didnt took any ip address
wism-a management 10.30.101.2
ap manager 10.30.101.3
vlan id 101
subnet 255.255.255.0
the client vlan is 202 ip 10.30.202.3
and all port access to this vlan in the edge switch
please advice
08-06-2007 12:13 PM
ip dhcp excluded-address 10.30.101.50 10.30.101.200, network 10.30.101.0, default-router 10.30.101.2
08-07-2007 07:13 PM
You're going to want to put the Management IP address of the controller as the DHCP server.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: