cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
319
Views
0
Helpful
2
Replies

internal DHCP in controller

ahmedalshami
Level 1
Level 1

dear

i wanna to configer internal dhcp in WISM

how can i

i need the pool start from 10.30.101.50 t0 200 /24 (255.255.255.0)

the network 10.30.101.0

netmask 255.255.255.0

the defoult router must be the WISM-A ip address

10.30.101.2

also i configured the DNS

and put in the ap-manager interface the primary DHCP server the ip 10.30.101.2

and i changet to 10.30.101.1

and its not work whats the mistake and what i shoul do ?i tried to use external dhcp server for ap 1020 and configure dns , optoin 43 but the ap didnt took any ip address

wism-a management 10.30.101.2

ap manager 10.30.101.3

vlan id 101

subnet 255.255.255.0

the client vlan is 202 ip 10.30.202.3

and all port access to this vlan in the edge switch

please advice

2 Replies 2

hadbou
Level 5
Level 5

ip dhcp excluded-address 10.30.101.50 10.30.101.200, network 10.30.101.0, default-router 10.30.101.2

jerryard1
Level 1
Level 1

You're going to want to put the Management IP address of the controller as the DHCP server.

Review Cisco Networking products for a $25 gift card