Jagdeep Gambhir Tue, 07/31/2007 - 10:21
User Badges:
  • Red, 2250 points or more


Yes you can attach Ethernet module to it and there is not need for any license or upgrade.



Jon Marshall Tue, 07/31/2007 - 11:27
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN


I'm not sure about v7.x but i know for sure that with 6.x it depends on the license you have.

With a restricted license you can run 3 10/100 fast ethernet interfaces only. So if you want to run 4 interfaces you are going to need an unrestricted license.

Alternatively you could look to use 802.1q trunks and create logical interfaces on your pix.



srue Tue, 07/31/2007 - 11:36
User Badges:
  • Blue, 1500 points or more

keep in mind that one of the pci slots in the 515 might have a vac installed in it - giving you only one usable slot.


This Discussion