vip redundancy

Answered Question
Jul 31st, 2007
User Badges:

Hi,

I am planing to deploy second CSS on my disaster recovery site. Distance between two sites is about 300km, and i am planing to use VIP redundancy because those two css will be on the same subnet (VPLS trough MPLS core). Is any restrictions to vip redundancy in mean of delay, jitter etc?

Correct Answer by Gilles Dufour about 9 years 12 months ago

The CSS uses a protocol similar to VRRP for communication/election between active/standby with a heartbeat every 1 sec.

After 3 missed heartbeat the CSS will failover.


You can adjust this timer with the following command


CSS11503-2(config)# vrrp-backup-timer ?

Integer value(Range: 3-120)

CSS11503-2(config)#


I believe that would be the only possible concern in your case.


Gilles.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Gilles Dufour Tue, 07/31/2007 - 23:09
User Badges:
  • Cisco Employee,

The CSS uses a protocol similar to VRRP for communication/election between active/standby with a heartbeat every 1 sec.

After 3 missed heartbeat the CSS will failover.


You can adjust this timer with the following command


CSS11503-2(config)# vrrp-backup-timer ?

Integer value(Range: 3-120)

CSS11503-2(config)#


I believe that would be the only possible concern in your case.


Gilles.

Actions

This Discussion