08-01-2007 06:47 AM
We have a ASA5505 at a branch office for IPSEC VPN to main office. Telneting to the ASA5505 gives a message "Could not open connection to the host, on port 23: Connect failed". The branch office has access to the internet. Any suggestions to be telnet to above firewall would be appreciated.
Solved! Go to Solution.
08-01-2007 07:03 AM
Using ssh to remote acccess your ASA box is always best way.
You can download and install a SSH client to your PC,like Putty, it's a free software, you can get it at
http://www.chiark.greenend.org.uk/~sgtatham/putty/
Or you can buy a SecureCRT if you want more powerful SSH client.
Thanks.
08-01-2007 06:51 AM
Hi
Are you trying to use telnet to the outside interface of the ASA ?.
You can't use telnet to connect to the outside interface of an ASA. You need to either
1) Use ssh
2) use telnet but within an IPSEC tunnel.
HTH
Jon
08-01-2007 07:03 AM
Using ssh to remote acccess your ASA box is always best way.
You can download and install a SSH client to your PC,like Putty, it's a free software, you can get it at
http://www.chiark.greenend.org.uk/~sgtatham/putty/
Or you can buy a SecureCRT if you want more powerful SSH client.
Thanks.
08-01-2007 07:06 AM
You can also telnet to the inside interace over the tunnel with the command management-access inside.
08-01-2007 07:18 AM
Thank you.
08-01-2007 07:17 AM
Jerry, Thanks Putty allowed access to the device.
Said
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: