Rob Huffman Wed, 08/01/2007 - 08:39
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Matthew,


Can you try this via the ephone template method listed below.The example shows how to disable the settings Access enable/disable;


settingsAccess {0 | 1 | 2}

Enables and disables the Settings button on an IP phone (Default is Enabled).


0 - Disabled.


1 - Enabled (default). Phone user can modify features by using the Settings menu.


2 - Restricted. Phone user is allowed to access User Preferences and volume settings only.



Can you try ?

-----------------------------------------------------

Router(config-ephone-template)# service phone settingsAccess 0

-----------------------------------------------------


Router(config-ephone-template)# exit


Router(config)# ephone 15


Router(config-ephone)# ephone-template 8


Router(config-ephone)# exit


Router(config)# telephony-service


Router(config-telephony)# create cnf-files


Router(config-telephony)# exit


Router(config)# ephone 15


Router(config-ephone)# reset


From this doc;


http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_command_reference_chapter09186a008061137f.html#wp1123331


Hope this helps!

Rob


Actions

This Discussion