hello,
I'm trying to configure my home cisco 2621xm to accept vpn connections. I've used many cisco pdf documents and they all same almost the same so I've done my configuration using these documents.
now I just can't get past this error message I'm getting and I have no idea why this is happening.
any ideas to help me get past this step, I'm really stuck here.
also, I've tried vpn client version 5 and 4.8
cisco ios version is:
Cisco IOS Software, C2600 Software (C2600-ADVIPSERVICESK9-M), Version 12.4(16), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 20-Jun-07 05:48 by prod_rel_team
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
vision-router-01 uptime is 2 hours, 53 minutes
System returned to ROM by power-on
System image file is "flash:c2600-advipservicesk9-mz.124-16.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2621XM (MPC860P) processor (revision 1.0) with 127308K/3764K bytes of memory.
Processor board ID JAD06350FM7
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
32K bytes of NVRAM.
49152K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
-------------------------
here is my the config that's vpn related
aaa authentication login MYTAC group tacacs+ local enable
aaa authorization network GROUPAUTHOR local
username someuser password 0 somepassword
crypto isakmp policy 5
encr aes 256
authentication pre-share
group 2
crypto isakmp keepalive 10 periodic
!
crypto isakmp client configuration group VTELVPN
key cisco123
dns 192.168.10.5
domain xyz.com
pool VTELVPNPOOL
crypto ipsec transform-set VTELSET1 esp-aes esp-sha-hmac
!
crypto dynamic-map VTELDYNAMAP 10
set transform-set VTELSET1
set identity thisrouter-01
reverse-route
crypto map VTELCLIENTMAP client authentication list MYTAC
crypto map VTELCLIENTMAP isakmp authorization list GROUPAUTOHOR
crypto map VTELCLIENTMAP client configuration address respond
crypto map VTELCLIENTMAP 10 ipsec-isakmp dynamic VTELDYNAMAP
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
no cdp enable
ppp chap hostname xxxxxx
ppp chap password 7 hahahahohoho
ppp pap sent-username xxxxxx password 7 hahahahohoho
crypto map VTELCLIENTMAP
!
ip local pool VTELVPNPOOL 192.168.6.3 192.168.6.254
