How to configure stickiness on ACE20 ?

Unanswered Question
Aug 1st, 2007

Config attached....

I have set-up 2 ace20's for SLB which works fine, however I am struggling to understand how to configure stickiness in the way I want to. I want any user on the network whom connects to any of the 5 rservers to have a sticky time of 60 minutes as requested by the application vendor, the app is http.

The network is subnetted and all subnets fall within the ranges 172.16.0.0/12 and 192.168.0.0/16. Can any one help me with the sticky configuration. As you can see from my config I started to configure this but do not quite understand how to classify the traffic and associate it with the serverfarm.

I am new to content switching.

Thanks

Paul Tribe (CCNA, CCMP, CCSP)

Technical Analyst

Nottingham City Council (UK)

Tel - +44 (0)115 915 4119

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
m.mcconnell Mon, 08/06/2007 - 11:01

You have stickiness configured but it has not been applied. Try this:

policy-map type loadbalance first-match L7_VIP_LB_ORDER_POLICY

class class-default

sticky-serverfarm Carefirst

Note the change in the last line. This applies the sticky rule. Hope this helps.

Dan Smith Thu, 08/09/2007 - 07:45

Thanks I had eventually worked it out but you are absolutely right.

Actions

This Discussion