10mb on wic-1t or wic-2t

cfajardo1_2 · ‎08-01-2007

is it possible to have bandwidth of 10mb on a serial port? say wic-1t or wic-2t?

thanks

spremkumar · ‎08-01-2007

Hi

Generally its recommended to subscribe 10 Mbps capacity through ethernet where you have the option have scalability in the future...

I dont think so that you will be able to get a 10meg link on a wic card from your telco...

You may have to go for DS-3 card to have the same or as i mentioned in the begining it will be on ethernet..

regds

kerek · ‎08-01-2007

Hi,

It is very depends in which platform used, because on some platform for instance 2600 series you can achieve the 8M with WIC-2T but you cannot use other serial ports installed in the same NM.

Anyway the maximum speed of 1T is 2M and of 2T is 8M.

Hope it helps,

Krisztian

pbhatkoti · ‎08-02-2007

If you are serious about using serial ports why don't u use HSSI port?

I think the standard of any serial card (except HSSI) is 2 megs. Cisco's proprietry serial ports (v.35, X.21, ..) supports more than 2 megs. I have tested upto 8 megs.

Pushkar bhatkoti