VLAN Interface Down on PIX/FWSM

Unanswered Question
Aug 2nd, 2007
User Badges:

We added a new vlan (vlan5) in an FWSM context with "nameif inside1" and IP address of 10.10.1.1 mask 255.255.255.0. Routes are set on the router. The interface and line protocol are shown as down. A "no shut" does not enable the interface.


Help? Thanks...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Thu, 08/02/2007 - 20:47
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


Have you added vlan 5 to the switch chassis ie.


firewall vlan-group 1 5


Obviously you need to modify the above to match what you alrady have.


Jon

parklabel Fri, 08/03/2007 - 06:47
User Badges:

The vlan was already added to the firewall vlan-group. I should've mentioned it earlier.


Thanks.

netwerk.support Fri, 08/03/2007 - 07:05
User Badges:

Hello


dit you add the interface in the system context :


allocate-interface vlan5

netwerk.support Mon, 08/06/2007 - 04:06
User Badges:

Hello


is the vlan5 created in the switch chassis ie.


If not you will see on the context

> sh int

Interface vlan5 "inside1", is administratively down, line protocol is down

Available but not assigned from Supervisor


greetings

Actions

This Discussion