cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1612
Views
0
Helpful
5
Replies

VLAN Interface Down on PIX/FWSM

parklabel
Level 1
Level 1

We added a new vlan (vlan5) in an FWSM context with "nameif inside1" and IP address of 10.10.1.1 mask 255.255.255.0. Routes are set on the router. The interface and line protocol are shown as down. A "no shut" does not enable the interface.

Help? Thanks...

5 Replies 5

Jon Marshall
Hall of Fame
Hall of Fame

Hi

Have you added vlan 5 to the switch chassis ie.

firewall vlan-group 1 5

Obviously you need to modify the above to match what you alrady have.

Jon

The vlan was already added to the firewall vlan-group. I should've mentioned it earlier.

Thanks.

netwerk.support
Level 1
Level 1

Hello

dit you add the interface in the system context :

allocate-interface vlan5

Yes, the new vlan has been allocated.

Thanks.

Hello

is the vlan5 created in the switch chassis ie.

If not you will see on the context

> sh int

Interface vlan5 "inside1", is administratively down, line protocol is down

Available but not assigned from Supervisor

greetings

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: