08-02-2007 02:12 PM - edited 03-05-2019 05:40 PM
We added a new vlan (vlan5) in an FWSM context with "nameif inside1" and IP address of 10.10.1.1 mask 255.255.255.0. Routes are set on the router. The interface and line protocol are shown as down. A "no shut" does not enable the interface.
Help? Thanks...
08-02-2007 08:47 PM
Hi
Have you added vlan 5 to the switch chassis ie.
firewall vlan-group 1 5
Obviously you need to modify the above to match what you alrady have.
Jon
08-03-2007 06:47 AM
The vlan was already added to the firewall vlan-group. I should've mentioned it earlier.
Thanks.
08-03-2007 07:05 AM
Hello
dit you add the interface in the system context :
allocate-interface vlan5
08-03-2007 07:54 AM
Yes, the new vlan has been allocated.
Thanks.
08-06-2007 04:06 AM
Hello
is the vlan5 created in the switch chassis ie.
If not you will see on the context
> sh int
Interface vlan5 "inside1", is administratively down, line protocol is down
Available but not assigned from Supervisor
greetings
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide