SIP Trunk sending unusual character

Unanswered Question
Anonymous (not verified) Fri, 08/03/2007 - 06:09
User Badges:

The %23 is the "#" character.


In most situations, the best solution is to fix the originating device so that it does not put the "#" into the dialed string. In some devices, the "#" signals the device to start the call setup instead of waiting for the interdigit timeout.


To fix the problem at the sip trunk, add a voice translation-rule like:


voice translation-rule 1

rule 1 /#$/ //


and attach to the voip dial-peer via "translation-profile"


http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

Actions

This Discussion