Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
894
Views
0
Helpful
3
Replies

Deploying an AIR-AP1121G

Go to solution
lionelpavy
Level 1
Level 1

‎08-03-2007 08:35 AM - edited ‎03-05-2019 05:41 PM

Hello

As required, I'm proceeding with a AP1121G deployment by accessing http://10.0.0.1 at first boot.

According the quickstart manual, the http access is allowed during 5mn.

Isn't answering ping test, any ideas ?

thank you for help.

Lionel Pavy

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
anandramapathy
Level 3
Level 3
In response to anandramapathy

‎08-22-2007 10:15 PM

YOu are right the IP is 10.0.0.1

YOu can also detect what IP the DHCP server has assigned the Access Point & set a static IP to the Aironet AP. The Utility is call IP Setup Utility

The following is the procedure

http://www.cisco.com/public/sw-center/sw-wireless.shtml

Step 2 Click Cisco Aironet Wireless LAN Client Adapters.

Step 3 Scroll down to the Windows Utility section.

Step 4 Click Cisco Aironet Client Utility (ACU) for Windows.

Step 5 Click the file IPSUvxxxxx.exe. The vxxxxxx identifies the software package version number.

Step 6 Read and accept the terms and conditions of the Software License Agreement.

Step 7 Download and save the file to a temporary directory on your hard drive and then exit the Internet browser.

Step 8 Double-click IPSUvxxxxxx.exe in the temporary directory to expand the file.

Step 9 Double-click Setup.exe and follow the steps provided by the installation wizard to install IPSU.

The IPSU icon appears on your computer desktop.

View solution in original post

0 Helpful
3 Replies 3

Go to solution
Pavel Bykov
Level 5
Level 5

‎08-05-2007 03:55 AM

Check if you have the PC station configured for DHCP, and firewall turned off (the one that connects to AP)

We had to reset AP twice, before DHCP started working. Also after a while of connection, like 1-2 minutes after reset, renew IP using DHCP on a PC. (for example by doing "repair network" on Windows interface options)

0 Helpful

Go to solution
anandramapathy
Level 3
Level 3
In response to Pavel Bykov

‎08-22-2007 06:01 AM

Hi,

Are you sure that the IP 10.0.0.1 ? or 192.168.0.1

To verify the IP Try connecting a Console to teh Access Point & type the following command

show ip int brief

0 Helpful

Go to solution
anandramapathy
Level 3
Level 3
In response to anandramapathy

‎08-22-2007 10:15 PM

YOu are right the IP is 10.0.0.1

YOu can also detect what IP the DHCP server has assigned the Access Point & set a static IP to the Aironet AP. The Utility is call IP Setup Utility

The following is the procedure

http://www.cisco.com/public/sw-center/sw-wireless.shtml

Step 2 Click Cisco Aironet Wireless LAN Client Adapters.

Step 3 Scroll down to the Windows Utility section.

Step 4 Click Cisco Aironet Client Utility (ACU) for Windows.

Step 5 Click the file IPSUvxxxxx.exe. The vxxxxxx identifies the software package version number.

Step 6 Read and accept the terms and conditions of the Software License Agreement.

Step 7 Download and save the file to a temporary directory on your hard drive and then exit the Internet browser.

Step 8 Double-click IPSUvxxxxxx.exe in the temporary directory to expand the file.

Step 9 Double-click Setup.exe and follow the steps provided by the installation wizard to install IPSU.

The IPSU icon appears on your computer desktop.

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card