Catalyst 3550 "Unknown routing protocol" on OSPF

wilson_1234_2 · ‎08-04-2007

I have a 3550 I am trying to configure OSPF and get :Unknown routing protocol"

Ususally means the image does not support ospf.

Do I need an image upgrade?

Cisco Internetwork Operating System Software

IOS (tm) C3550 Software (C3550-I9Q3L2-M), Version 12.1(22)EA6, RELEASE SOFTWARE

(fc1)

Compiled Fri 21-Oct-05 02:12 by yenanh

Image text-base: 0x00003000, data-base: 0x006CF240

ROM: Bootstrap program is C3550 boot loader

Switch uptime is 20 minutes

System returned to ROM by power-on

System image file is "flash:c3550-i9q3l2-mz.121-22.EA6.bin"

cisco WS-C3550-48 (PowerPC) processor (revision E0) with 65526K/8192K bytes of m

emory.

Processor board ID CHK0631V3E9

Last reset from warm-reset

Running Layer2/3 Switching Image

Pari Thiagasundaram · ‎08-04-2007

The one that you are running is a SMI image. You would need a EMI image to get full L3 routing functionality.

wilson_1234_2 · ‎08-04-2007

Thanks, i just found that out.

Can you upgrade these 3550s?

I have 5526K/8192K bytes of memory and I see now way to upgrade the ram after taking the cover off.

All the EMI images need 16M.

What can I do?

wilson_1234_2 · ‎08-04-2007

I have it now, thanks all.