mohammedmahmoud Sun, 08/05/2007 - 11:09

Hi,


If i understand your question right then the lower half subnet is from 192.168.3.1 to 192.168.3.126 (0 and 127 are omitted as the subnet ID and the subnet broadcast address), or in another format 192.168.3.0/25.


HTH,

Mohammed Mahmoud.

Pavel Bykov Sun, 08/05/2007 - 11:51

or if you want to know what the address is in host/mask notation, than it is:


Address:....11000000.10101000.00000011.00000010

Mask:.........11111111.11111111.11111111.00000000

Network:....11000000.10101000.00000011.00000000


Mask in host/network notation:

nnnnnnnn.nnnnnnnn.nnnnnnnn.hhhhhhhh

(network is Address bits, where mask bits are ones)

Pavel Bykov Sun, 08/05/2007 - 11:59

Or if you do want to plan subnetting like Mohammed suggested, then it all depends as to how big of a network you need. If you want point to point link with just two addresses, then you can use 30 bit mask, like so: 192.168.3.0/30

Where 192.168.3.0 is network, 192.168.3.1 and 192.168.3.2 are usable addresses and 192.168.3.3 is broadcast.

Actions

This Discussion