Adding Devices (SNMPv3) - Cisco LMS 2.6

Unanswered Question
Aug 6th, 2007
User Badges:

Hello everybody!


I'm having problems adding devices in Cisco LMS. Those devices are using SNMPv3. Everything seems to be working normal when I execute


snmpwalk -v 3 -u ciscolms -l authPriv -a MD5 -A ciscolms -X ciscolms XXX.XXX.XXX.XXX


However, when I add a device in LMS, it is placed in "Questioned" devices, and the following debug message is received:


Aug 6 14:34:53: SNMP: Get request, reqid 67181, errstat 0, erridx 0

system.1.0 = NULL TYPE/VALUE

system.2.0 = NULL TYPE/VALUE

system.4.0 = NULL TYPE/VALUE

system.5.0 = NULL TYPE/VALUE

system.6.0 = NULL TYPE/VALUE

Aug 6 14:34:53:

Incoming SNMP packet

Aug 6 14:34:53: v3 packet security model: v3 security level: auth

Aug 6 14:34:53: username: ciscolms

Aug 6 14:34:53: snmpEngineID: 8000000903000019E8AC3290

Aug 6 14:34:53: snmpEngineBoots: 1 snmpEngineTime: 602068

Aug 6 14:34:53: SNMP: Response, reqid 67181, errstat 16, erridx 0

system.1.0 = NULL TYPE/VALUE

system.2.0 = NULL TYPE/VALUE

system.4.0 = NULL TYPE/VALUE

system.5.0 = NULL TYPE/VALUE

system.6.0 = NULL TYPE/VALUE


Could you please tell me what might be causing the problem?


Best Regards,

Vladislav Vasilev

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
frankzehrer Mon, 08/06/2007 - 03:55
User Badges:
  • Silver, 250 points or more

Hi Vladislav,


authpriv will maybe not supported in LMS 2.6 and is still not supported in LMS 3.0. For LMS 3.0 there will be a patch coming until the end of this year.


Until then use AuthNoPriv.


Hope that helps.

Best regards,

Frank

v.vasilev Mon, 08/06/2007 - 05:56
User Badges:

Hello Frank,


Thank you very much for your prompt reply!

It's working now :)


Best Regards,

Vladislav

Actions

This Discussion