08-06-2007 04:46 PM - edited 03-05-2019 05:44 PM
Hi
I have a 4510 and will like to use it as a DHCP server. However I have a few situations.
I have multiple VLANs and each must be on a separate Subnet.
Thank you
08-06-2007 05:03 PM
Thats fine, just configure multiple DHCP pools. Each DHCP pool will only give IP's out to hosts in its own VLAN.
Such as
ip dhcp pool Vlan170
network 170.0.0.0 255.255.255.0
will give out ips to
interface vlan170
ip address 170.0.0.1 255.255.255.0
but not
interface vlan171
ip address 171.0.0.1 255.255.255.0
08-06-2007 05:25 PM
In addition read the following links.
Configuring IOS DCHP server
IOS DHCP server roadmap
http://www.cisco.com/en/US/products/ps6922/products_feature_guide09186a00807dc0f1.html#wp1053389
HTH
Jorge
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: