Solved: Cisco 2811XM slot changes with serial interface

cindylee27 · ‎08-06-2007

Hi Experts,

I would like to check if lets say I put in extra WIC Card to the extra slot, will Serial0/0

changed slot to the new slot, meaning as below:

ROUTER Back DISPLAY

----- Old WIC ---- empty slot -----

Serial0/0

-----old WIC---- new slot -----

Serial0/1 Serial0/0

Will the slot changes??

Thanks in advanced.

spremkumar · ‎08-06-2007

hi

Cisco 2811 has slots numbered like 0,1,2,3 if you insert a wic (either wic 1t or wic2t)it will be numbered accordingly.

As far as my understanding goes you will have Serial 0/0 with Wic-1T and Serial 0/0 and 0/1 when you have Wic-2T.

If you are trying to install a card onto the new slot then it will be numbered in new fashion with respect to the slot its inserted.

Is that answers your query ?

regds

spremkumar · ‎08-06-2007

hi

Cisco 2811 has slots numbered like 0,1,2,3 if you insert a wic (either wic 1t or wic2t)it will be numbered accordingly.

As far as my understanding goes you will have Serial 0/0 with Wic-1T and Serial 0/0 and 0/1 when you have Wic-2T.

If you are trying to install a card onto the new slot then it will be numbered in new fashion with respect to the slot its inserted.

Is that answers your query ?

regds

cindylee27 · ‎08-06-2007

Yup,

Thanks Sprem..:)