discovery of APs

Unanswered Question
Aug 7th, 2007

How can I discover lightweight 1131AG Access Point using 2106 WLAN Controller.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ankbhasi Tue, 08/07/2007 - 08:46

Hi Friend,

You have to first configure your 2106 WLC with management ip address/mask and gateway and vlan number and then connect your LWAPP AP on infra switch connected to 2106 controller in same vlan and it will join your WLC.

On the other hand if you want your APs to be in different vlan than management subnet defined on your controller then you have to configure either DHCP option 43 or make them learn your controller management ip address via DNS.

You can also have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig41/c41lwap.htm#wp1105242

HTH

Ankur

*Pls rate all helpfull post

ahmad-sajjad Tue, 08/07/2007 - 22:11

Hi

Thanks for your reply. I need to clarify on your point

"You have to first configure your 2106 WLC with management ip address/mask and gateway and vlan number and then connect your LWAPP AP on infra switch connected to 2106 controller in same vlan and it will join your WLC."

How AP will get an IP? Do I have to configure WLC as Internal DHCP?

ankbhasi Wed, 08/08/2007 - 02:38

Hi Friend,

You can either configure controller as internal DHCP or you must be having some external DHCP server correct having pool for management vlan/subnet?

Regards,

Ankur

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode