smothuku Wed, 08/08/2007 - 04:40
User Badges:
  • Silver, 250 points or more


Hi Narayanna ,


Please paste the config of both the routers ?


means working condition and not working condition.


Thanks :)

Satish

Richard Burts Wed, 08/08/2007 - 05:30
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

lakshmee


In addition to the config of both routers it may be helpful if you would post the output of show isdn status on both routers.


HTH


Rick

lakshmeenarayanan Thu, 08/09/2007 - 08:09
User Badges:

Bajaj-TVL#sh isdn status

Global ISDN Switchtype = basic-net3

ISDN BRI0/0/0 interface

dsl 0, interface ISDN Switchtype = basic-net3

Layer 1 Status:

ACTIVE

Layer 2 Status:

TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED

Layer 3 Status:

2 Active Layer 3 Call(s)

CCB:callid=802D, sapi=0, ces=1, B-chan=1, calltype=DATA, hdlctype=HDLC-TRUNK

CCB:callid=802E, sapi=0, ces=1, B-chan=2, calltype=DATA, hdlctype=HDLC-TRUNK

Active dsl 0 CCBs = 2

The Free Channel Mask: 0x80000000

at this time the isdn layer is active in 1841 but it not active always sometimes it shows "layer1 is deactivated".But in 2600 series router it is active always

Actions

This Discussion