CiscoWorks Integration Utility and HPOV NNM 7.51

Unanswered Question
Aug 8th, 2007
User Badges:

Does the CW Integration utility (v1.6 or v1.7) support HP NNM 7.51?


Just wondering if anyone has experienced issues integrating CiscoWorks LMS with NNM 7.51. I have previously installed the integration utility (v1.6) with no issues.


However for a current client install I have run into some issues. I have opened a TAC case but the initial response was that the readme (for both versions) indicates supporting NNM version 7.5, not 7.51.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
Joe Clarke Wed, 08/08/2007 - 21:30
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The latest version of the Integration Adapter for NNM (1.7) has only been tested up to 7.5. TAC's answer is correct. While integration with 7.51 may work, it has not been officially tested, and thus cannot be supported.

rgomes Fri, 07/18/2008 - 06:59
User Badges:

Clarke


When we are running with NNM Remote Consoles, do we need to install the integration utility on the Remote Consoles too or only on the NNM Management server?


Thanks for any help

Joe Clarke Fri, 07/18/2008 - 08:07
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Integration is only done on the NNM server.

Actions

This Discussion