Hi all!
Well, I have a 7961 phone with the 7914 expansion. I have configured an ephone-dn with "transfer-mode consult", and I have assigned it a button of the 7961.
If I transfer a call with entering the complete number in the 7961?s keyboard, it works ok (prior to transfer the call I can consult), but if I use the 7914 the transfer is done in blind mode... Can this behavior be changed?
Thank you!!
This is the configration (look at ephone-dn 14)
ephone-dn 1 dual-line
number 1000
pickup-group 7000
ephone-dn 2 dual-line
number 1001
pickup-group 7000
label XXXXX
description 1001
ephone-dn 3 dual-line
number 1002
pickup-group 7000
label XXXXX
description 1002
ephone-dn 4 dual-line
number 1003
pickup-group 7000
label XXXXX
description 1003
ephone-dn 5
number 1004
pickup-group 7000
label XXXXX
description 1004
ephone-dn 6 dual-line
number 1005
pickup-group 7000
label XXXXX
description 1005
ephone-dn 7 dual-line
number 1006
pickup-group 7000
label XXXXXX
description 1006
ephone-dn 8 dual-line
number 1007
pickup-group 7000
label XXXXXX
description 1007
ephone-dn 9 dual-line
number 1008
pickup-group 7000
label XXXXXX
description 1008
ephone-dn 10 dual-line
number 1009
pickup-group 7000
label XXXXXXX
description 1009
call-forward night-service 3030
transfer-mode consult
night-service bell
ephone-dn 11
number 1010
pickup-group 7000
label XXXXXX
description 1010
ephone-dn 12
number 1011
pickup-group 7000
label XXXXXX
call-forward night-service 4001
night-service bell
ephone-dn 13
number 1012
pickup-group 7000
label BIC Principal
call-forward night-service 4001
night-service bell
ephone-dn 14 dual-line
number 1013
pickup-group 7000
label XXXXX
transfer-mode consult
ephone-dn 15
number 1014
pickup-group 7000
label XXXXXX
call-forward night-service 4001
night-service bell
ephone 11
device-security-mode none
mac-address 001B.5452.9200
type 7961 addon 1 7914
button 1:11 2:12 3:13 4:14
button 5:15 7m2 8m3 9m4
button 10m5 11m6 12m7 13m8
button 14m9 15m10 16m1
