08-08-2007 10:29 PM - edited 03-14-2019 10:59 PM
Hi all!
Well, I have a 7961 phone with the 7914 expansion. I have configured an ephone-dn with "transfer-mode consult", and I have assigned it a button of the 7961.
If I transfer a call with entering the complete number in the 7961?s keyboard, it works ok (prior to transfer the call I can consult), but if I use the 7914 the transfer is done in blind mode... Can this behavior be changed?
Thank you!!
This is the configration (look at ephone-dn 14)
ephone-dn 1 dual-line
number 1000
pickup-group 7000
ephone-dn 2 dual-line
number 1001
pickup-group 7000
label XXXXX
description 1001
ephone-dn 3 dual-line
number 1002
pickup-group 7000
label XXXXX
description 1002
ephone-dn 4 dual-line
number 1003
pickup-group 7000
label XXXXX
description 1003
ephone-dn 5
number 1004
pickup-group 7000
label XXXXX
description 1004
ephone-dn 6 dual-line
number 1005
pickup-group 7000
label XXXXX
description 1005
ephone-dn 7 dual-line
number 1006
pickup-group 7000
label XXXXXX
description 1006
ephone-dn 8 dual-line
number 1007
pickup-group 7000
label XXXXXX
description 1007
ephone-dn 9 dual-line
number 1008
pickup-group 7000
label XXXXXX
description 1008
ephone-dn 10 dual-line
number 1009
pickup-group 7000
label XXXXXXX
description 1009
call-forward night-service 3030
transfer-mode consult
night-service bell
ephone-dn 11
number 1010
pickup-group 7000
label XXXXXX
description 1010
ephone-dn 12
number 1011
pickup-group 7000
label XXXXXX
call-forward night-service 4001
night-service bell
ephone-dn 13
number 1012
pickup-group 7000
label BIC Principal
call-forward night-service 4001
night-service bell
ephone-dn 14 dual-line
number 1013
pickup-group 7000
label XXXXX
transfer-mode consult
ephone-dn 15
number 1014
pickup-group 7000
label XXXXXX
call-forward night-service 4001
night-service bell
ephone 11
device-security-mode none
mac-address 001B.5452.9200
type 7961 addon 1 7914
button 1:11 2:12 3:13 4:14
button 5:15 7m2 8m3 9m4
button 10m5 11m6 12m7 13m8
button 14m9 15m10 16m1
Solved! Go to Solution.
08-09-2007 01:05 AM
Try entering
transfer-system full-consult dss
under telephony-services
08-09-2007 01:05 AM
Try entering
transfer-system full-consult dss
under telephony-services
08-13-2007 05:43 AM
that works perfectly (I have no oportunity to probe it until now.
Tahnks!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: