08-10-2007 03:12 AM - edited 03-03-2019 06:16 PM
Am trying to apply a route-map to a vlan interface using the "ip policy route-map" command.
Although I am able to configure this command on the vlan interface, it doesnt actually appear as applied to the interface, when i run "show ip policy"
Can you actually apply a route-map to a VLAN inteface ?
Mark
08-10-2007 03:21 AM
hi
can you revert with the details about the device in which you are trying the same ?
regds
08-10-2007 03:24 AM
Am configuring a Catalyst 3560 Switch running IOS 12.2.
IP Routing is turned on, and I have a number of vlan interfaces configured on it.
08-10-2007 03:47 AM
hi
do make sure whether you are meeting all the prerequisite for having the same configured in your Cisco 3560 Switch..
regds
08-10-2007 03:54 AM
Hi,
PBR on 3560 requires sdm template routing "sdm prefer routing", and before all you need IP Services IOS (formerly called the Enhanced Multilayer Image, or EMI).
HTH,
Mohammed Mahmoud.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide