Need help in configuration of transparent firewall

Unanswered Question
Aug 10th, 2007

I have configured pix 525 with ios version 7.2 in transparent mode ,Kept both interfaces in different vlan & Allowed any to any traffic through firewall ...

Following are the observations -

=> As per rule arp request is passing through firewall & i am getting arp of all connected devices

=> Able to ping both side devices from inside firewall & same vice-versa (which are in same ip range)

Till its ok ....But

=> i am not able to ping from one vlan to other vlan ,we are running ospf on both side ,OSPF updates are not passing through transparent firewall

Firewall config -

#firewall transparent

#ip address 1.1.1.1 (managment purpose )

#access-list 100 permit ip any any

#access-group 100 in/out int inside

#access-group 100 in/ot int outside

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion