08-12-2007 05:35 AM
I have a cisco 1811 ISR and i want to configure the dial backup on the analog port of router V.92. I don't want to conect an externam analog moden on AUX port. I don't know how to configure this process.
08-17-2007 06:15 AM
I am attaching the Cisco Wireless ISR and HWIC Access Point Configuration Guide please go thought it get your solution.
08-27-2007 01:33 PM
interface FastEthernet0
backup delay 10 60
backup interface Async1
ip address "ISP static ip and mask"
ip nat outside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
no ip mroute-cache
speed auto
half-duplex
interface Async1
ip address 170.1.1.16 255.255.255.0
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer in-band
dialer idle-timeout 300
dialer string "phone number to dial"
dialer-group 1
async mode interactive
keepalive 10 3
fair-queue 64 16 0
ppp authentication chap
!
interface Dialer1
no ip address
no cdp enable
This has worked for me.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: