qos issue

Unanswered Question
Aug 12th, 2007
User Badges:

Dear guys


i have a wireless link between my routers


here is the topology :


SERVER -- Router --- Wireless <---->Wireless ---- router --- clients


by the way my wireless link is 36 Mbps but sometimes suddenly it decrease to 6 Mbps

on my client side i have two type of cumstomer .. gold one and bulk one

i need a dynamic qos that if the link congest suddenly my gold customer have a very better bandwidth access than my ordinary customer



regards



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Pavel Bykov Tue, 08/14/2007 - 09:39
User Badges:
  • Silver, 250 points or more

CBWFQ will accomplish exactly what you need. Configure it on both routers and apply the service-policy in output direction on the wireless interface.

Here is a detailed guide:

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800b75af.html#1041636



But there is a problem. Because you have a variable speed, you need to apply the map where the buffers of output interface fill up. In this case it's the wireless radio interface. Is your wireless a module in your router?

Actions

This Discussion