VoIP

bericaleb · ‎08-12-2007

Can someone give me some guides on how I can setup VoIp within our Company's network. I want to be able to connect all our branch offices back to our Headquarters offices and vice versa to be able to use our existing data network to carry voice traffic. Please advice me on what's needed to able to deploy VoIP within our organization.

Rob Huffman · ‎08-13-2007

Hi Bernadette,

Here are some "getting started" type docs that have a fair amount of detailed info. Reading these should give you some design ideas;

Cisco Unified Communications SRND Based on Cisco Unified CallManager 4.x

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a00806ecab5.html

Cisco Unified Communications SRND Based on Cisco Unified CallManager 5.x

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a0080783d84.html

Cisco Unified CallManager Express Solution Reference Network Design Guide

IP Telephony Deployment Models

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_implementation_design_guide_chapter09186a00805f0a2b.html

Hope this helps!

Rob