Cisco3020 IOS upgrade failure

Unanswered Question
Aug 13th, 2007
User Badges:

I ran "distribut image" job for C-Class blade, RME was able to copy the image but failed to reboot the devices with the following error:

Device will be rebooted.

SWIM5006: Device Reboot operation failed.

The device is not configured for reboot. The SNMP Write Community string might be wrong.

The command SNMP server system shutdown should be in the running configuration on the device."

I verified the community string read/write and both are correct and CDA show OK. Do you know if I'm missing anything else?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Joe Clarke Mon, 08/13/2007 - 08:57
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You need to have the following command configured on the device:

snmp-server system-shutdown


This Discussion