Mac address filtering on LAN (RJ-45) and WLAN

croue · ‎08-14-2007

I have a router 871W that I try to configure with 2 VLANs and 2 WLANs.

I would like to filter LAN and WLAN access by mac-address on one LAN and one WLAN only.

Is it possible on the router 871W (the IOS is 12.4(15)T1 advancedsecurityk9)

file of configuration is attached

drolemc · ‎08-20-2007

access-list permit <48-bit mac-address>, access-list deny ffff.ffff.ffff and in the acces list specify the VLAN and bridge-group input-access-list , bridge-group output-access-list .