T1 PRI channel monitoring

Unanswered Question
Aug 14th, 2007
User Badges:


In 6608-T1 module, I'm able to monitor the channel status of each T1 port through http. Picture attached is picture of web interface. Most importantly this page displays statistics on TX, RX and error packets of each channel per T1 port.

I was wondering if there is any way to monitor the channels on a CMM-6T1 interface card the same way as I had done with the 6608 T1 port.

Thanks in advance.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion