Solved: Remove statement

albolabris · ‎08-15-2007

How do I remove the statement "no ip mroute-cache" from my vlan config

!

interface Vlan315

description AGS

ip address 10.10.20.1 255.255.252.0

ip helper-address 10.4.48.1

ip helper-address 10.4.55.5

no ip mroute-cache

!

I had Multicast routing on with the statement "ip pim dense-mode" under the vlan. I removed the multicast routing then removed the statement "ip pim dense-mode" under the vlan and then it auto added the statement "no ip mroute-cache"

Edison Ortiz · ‎08-15-2007

Enter

"ip mroute-cache"

Default commands will not be visible in the config and by default ip mroute-cache is enabled on SVIs.

View solution in original post

Edison Ortiz · ‎08-15-2007

Enter

"ip mroute-cache"

Default commands will not be visible in the config and by default ip mroute-cache is enabled on SVIs.

albolabris · ‎08-15-2007

It's telling me its an Incomplete command

CO-1-MDF(config)#int vlan 315

CO-1-MDF(config-if)#ip mroute-cache

% Incomplete command.

albolabris · ‎08-15-2007

I found it its "ip mroute-cache distributed"

Thank you...

Edison Ortiz · ‎08-15-2007

You need the distributed option because multicast fast-switching is done in hardware instead of software on that particular switch.