cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
385
Views
0
Helpful
3
Replies

A problem about WS-X6348-RJ-45

jj-zhou
Level 1
Level 1

Hi netpro:

I have a big problem ,the module WS-X6348-RJ-45 is not working on my core switch 6509 , the port can't forword the packet ,and I reload the switch ,so all ports on module 6348 is orange ,and display errdisable.

Please tell me what is the real fault on the module ,thanks.

1 Accepted Solution

Accepted Solutions

Hi Friend,

Get ir RMAed/replaced.

Regards,

Ankur

*Pls rate all helpfull post

View solution in original post

3 Replies 3

ankbhasi
Cisco Employee
Cisco Employee

Hi Friend,

The error displayed as "Coil Packet Buffer Error" gives an indication of hardware failure. But before getting it replaced can you try reseating the card in some other slot and if you get same error in "sh test" then get it replaced.

HTH

Ankur

*Pls rate all helpfull post

Hi Ankur :

thank u for your response, I reseat the module x6348 from slot 4 to slot 3 , the error displayed still.

Hi Friend,

Get ir RMAed/replaced.

Regards,

Ankur

*Pls rate all helpfull post

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco