Same thing here :

Activating CSD in ASDM give :

-Start-

[OK] webvpn

webvpn

[ERROR] csd enable

Unable to use CSD image. Try another

-End-

ASA : 7.2(2)

ASDM : 5.2(2)

CSD IMAGE :

securedesktop-asa-3.1.1.45-k9.pkg

or

securedesktop-asa-3.2.0.136-k9.pkg

Here is what i've done ( After the failure in ASDM)

asa-*****# show webvpn csd image disk0:/securedesktop-asa-3.1.1.29-k9.pkg

This is a valid Cisco Secure Desktop image:

Version : 3.1.1.29

Built on : Tue 04/18/2006 10:19:43.03

asa-*****# conf t

asa-*****(config)# webvpn

asa-*****(config-webvpn)# csd image disk0:/securedesktop-asa-3.1.1.29-k9.pkg

asa-*****(config-webvpn)# csd enable

ERROR: Unable to use CSD image. Try another

Privilege Level : 15

Enough free space on flash.

Any idea?

License problem?

I have a base license.

I have base license comes with 2 SSL VPN, and 250 vpn, with CSC as well.

I have another box here, ASA 8.0(2) with "Security plus" license and it works well. Unable to find a clue about that on cisco website.

This option is not available in ASDM for ASA version 7.0(2). I find something in CLI :

# conf t

# webvpn

# cache

# max-object-size

How much ? What was the value ?

We found that it seem to be a cache problem.

But in version 7.x there is no command to enlarge the cache.

We tried to clean up the cache but it does not work at all on the 7.x ( the same cleanup work well on the 8.x)

Is there a way to do that? We are close ...

In ASA 7.1.x and 7.2.x you don't have the "webvpn cache-fs" command. You don't need it.

There's plenty of cache internally allocated for the CSD and SVC images .

With 8.0.x, because you can have up to 4 AnyConnect SSL VPN images and 1 CSD image, we give you the ability to allocate cache with the command, based on your need.

Regards,

Nelson

While that's true we SHOULD not need it. We apparently do or we need a way to clear the cache.

Cache issue.

We managed to enable the csd!

flush all trace of sdesktop.

try to flush the trace within the cache too.

reload

enable csd

But i still have a problem. The section of csd is incomplete ...

I set the cache-fs to 32 and it works.

I changed the max-object-size to 32 at first, what's the default value I should put it back to?