Monitor channel usage on PRI for 2800 MGCP Gateway

Unanswered Question

Procedure

Access Performance Monitor by choosing

Start > Programs > Administration Tools > Performance.

Choose Action > New log settings and enter a name for the counter log.

Click Counters.

Click Add.

Click Performance Object.

Click Process.

In Select Counters from List and Select Instances from List, choose the following counters and

associated instances:

% Processor Time/_Total

% Processor Time/ccm

% Processor Time/AudioTranslator

% Processor Time/Aupair

% Processor Time/CiscoMessagingI

% Processor Time/ctftp

% Processor Time/CTIManager

% Processor Time/DLLHOST

% Processor Time/sqlservr

% Processor Time/TcdSrv

% Processor Time/RisDC

% Processor Time/snmp

% Processor Time/CallBackService

% Processor Time/LogoutService

% Processor Time/InsertCDR

Virtual Bytes/_Total

Virtual Bytes/AudioTranslator

Virtual Bytes/Aupair

Virtual Bytes/ccm

Virtual Bytes/CiscoMessagingI

Virtual Bytes/ctftp

Virtual Bytes/CTIManager

Virtual Bytes/DLLHOST

Virtual Bytes/sqlservr

Virtual Bytes/TcdSrv

Virtual Bytes/RisDC

Virtual Bytes/snmp

Virtual Bytes/CallBackService

Virtual Bytes/LogoutService

Virtual Bytes/InsertCDR

Private Bytes/_Total

Private Bytes/ccm

Private Bytes/AudioTranslator

Private Bytes/Aupair

Private Bytes/CiscoMessagingI

Private Bytes/ctftp

Private Bytes/CTIManager

Private Bytes/DLLHOST

Private Bytes/sqlservr

Private Bytes/TcdSrv

Private Bytes/RisDC

Private Bytes/snmp

Private Bytes/CallBackService

Private Bytes/LogoutService

Private Bytes/InsertCDR

Click the General tab.

Enter the collection interval of 60 and for Units choose seconds, so the data is averaged and

collected over 60-second intervals.

Click Apply.

Click the Schedule tab.

Choose the At option for Start log and enter the current time and date to enable the logging to continue after a reboot.

Click Save to save your settings, such as the objects that you chose.

This allows you to load the same data again, if necessary.

Note : The log files will expand in size. Manually purge the log files to maintain optimal disk

space.

Performance Monitor can simultaneously collect data from multiple installed systems and store the information in a single log file. You can export the log file into a Tab Separated Value (TSV) file or a Comma Separated Value (CSV) file. View the TSV file or CSV file in a spreadsheet application. Note : You must enable Statistics in Cisco CallManager Administration for the Performance Monitor to collect data.

Cisco CallManager directly updates Microsoft Performance Monitor counters. The call perfmon counters as call-processing-related counters contain simple, useful counts such as number of registered phones, number of active calls, and number of available conference bridge resources. The following list identifies the Cisco CallManager performance counters:

Cisco CallManager

Cisco Phones

Cisco Lines

Cisco H323

Cisco MGCP Gateways

Cisco MOH Device

Cisco Analog Access

Cisco MGCP FXS Device

Cisco MGCP FXO Device

Cisco MGCP T1CAS Device

Cisco MGCP PRI Device

Customize Performance Monitor to view the Cisco CallManager-related parameters that you want to monitor by choosing the object, counter, and the instance.

Actions

This Discussion