Cisco5509 switch

Unanswered Question
Aug 16th, 2007

Hi,

I have Cisco5509 with WS-X5530 Sup ,I am not able to access the console port of the SUP engine.

Telnetting to the switch IP ask me to enter the password,When I enter the password it says connection to host is closed.Is it due to wrong password?

How to access the console port of the WS-C5509 which has the WS-X5530 SUP engine?

How to recover the password?

Simply using SET command can I change the password to new password?

Please help me to resolve the issue.

Thanks and Regards,

S.Venkataraman.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
JORGE RODRIGUEZ Thu, 08/16/2007 - 03:30

if Im not mistaken you could use a straight-through CAT5 cable for console.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010ff7a.shtml#connectcat5000

for password recovery you need to console to the switch, follow this instructions,

password recovery http://www.cisco.com/en/US/products/hw/switches/ps708/products_password_recovery09186a00801349aa.shtml

HTH

Jorge

Actions

This Discussion