I need to busyout the b-channels on all the T1-PRI's on a WS-SVC-CMM Cat6k voice linecard. I have these configured using MGCP signaling with CCM 4.1.3sr4d
There are active calls on the T1's and I would like to busyout the channels when the call completes.
Any help is greatly appreciated.
You can gracefully busy-out (graceful out-of-service) B-channels for troubleshooting purposes. This document discusses how to busy-out B-channels from a Cisco CallManager for Media Gateway Control Protocol (MGCP) controlled T1 or E1 voice ports.
From this excellent doc;
Busy-Out ISDN B-Channels in Cisco CallManager Configuration Example
Hope this helps!